Description

Generates granular synthesis textures.

Syntax

ares grain xamp, xpitch, xdens, kampoff, kpitchoff, kgdur, igfn, \
      iwfn, imgdur [, igrnd]

Initialization

igfn -- The ftable number of the grain waveform. This can be just a sine wave or a sampled sound.

iwfn -- Ftable number of the amplitude envelope used for the grains (see also GEN20).

imgdur -- Maximum grain duration in seconds. This is the biggest value to be assigned to kgdur.

igrnd (optional) -- if non-zero, turns off grain offset randomness. This means that all grains will begin reading from the beginning of the igfn table. If zero (the default), grains will start reading from random igfn table positions.

Performance

xamp -- Amplitude of each grain.

xpitch -- Grain pitch. To use the original frequency of the input sound, use the formula:

where sndsr is the original sample rate of the igfn sound.

xdens -- Density of grains measured in grains per second. If this is constant then the output is synchronous granular synthesis, very similar to fof If xdens has a random element (like added noise), then the result is more like asynchronous granular synthesis.

kampoff -- Maximum amplitude deviation from xamp. This means that the maximum amplitude a grain can have is xamp + kampoff and the minimum is xamp. If kampoff is set to zero then there is no random amplitude for each grain.

kpitchoff -- Maximum pitch deviation from xpitch in Hz. Similar to kampoff.

kgdur -- Grain duration in seconds. The maximum value for this should be declared in imgdur. If kgdur at any point becomes greater than imgdur, it will be truncated to imgdur.

The grain generator is based primarily on work and writings of Barry Truax and Curtis Roads.

Examples

This example generates a texture with gradually shorter grains and wider amp and pitch spread. Play grain.csd, and beats.wav

<CsoundSynthesizer> 
<CsOptions> 
; Select audio/midi flags here according to platform 
-odac     ;;;realtime audio out 
;-iadc    ;;;uncomment -iadc if realtime audio input is needed too 
; For Non-realtime ouput leave only the line below: 
; -o grain.wav -W ;;; for file output any platform 
</CsOptions> 
<CsInstruments> 

sr = 44100 
ksmps = 32 
nchnls = 2 
0dbfs  = 1 

instr 1 

insnd   = 10 
ibasfrq = 44100 / ftlen(insnd) ; Use original sample rate of insnd file 

kamp   expseg .001, p3/2, .1, p3/2, .01 ;a swell in amplitude
kpitch line ibasfrq, p3, ibasfrq * .8 
kdens  line 600, p3, 100 
kaoff  line 0, p3, .1
kpoff  line 0, p3, ibasfrq * .5 
kgdur  line .4, p3, .01
imaxgdur =  .5 

asigL  grain kamp, kpitch, kdens, kaoff, kpoff, kgdur, insnd, 5, imaxgdur, 0.0 
asigR  grain kamp, kpitch, kdens, kaoff, kpoff, kgdur, insnd, 5, imaxgdur, 0.0 
       outs asigL, asigR

endin 
</CsInstruments> 
<CsScore> 
f5  0 512  20 2 ; Hanning window 
f10 0 16384 1  "beats.wav" 0 0 0 

i1 0 15 
e 
</CsScore> 
</CsoundSynthesizer> 

Credits